Buying Guide
The Best SSD DAS Storage Options
SSD DAS spans 2.5-inch SATA arrays and M.2 NVMe enclosures with very different throughput. We split the two architectures before ranking.
By The PC Journal editorial team
11 min read8 products evaluated
SSD DAS covers two fundamentally different architectures: multi-bay 2.5-inch SATA SSD enclosures capped around 500-600MB/s per drive, and M.2 NVMe enclosures that can exceed 3,000-7,000MB/s depending on the bridge chip and host generation.
We split these architectures explicitly rather than ranking them together, since a SATA SSD array and an NVMe enclosure solve very different speed and capacity problems despite both technically being SSD DAS.
Quick Picks
Our 8 recommendations at a glance. Tap a pick for the full verdict.
Best NVMe 10Gbps
UGREEN Tool-Free M.2 NVMe SSD Enclosure (10Gbps)
UGREEN's NVMe enclosure hits a genuine 10Gbps over USB 3.2 Gen 2 (with a matching USB-C 3.2 Gen2 cable), supporting M/B&M-key NVMe SSDs in 2230/2242/2260/2280 sizes up to 8TB, explicitly not SATA NGFF or mSATA SSDs.
Best for: buyers prioritizing m.2 nvme enclosure, up to 8tb, 10gbps
Our take Check price for UGREEN Tool-Free M.2 NVMe SSD Enclosure (10Gbps) (opens in a new tab)
Best Single-Slot NVMe
Sabrent USB-C NVMe Enclosure & Reader, 10Gbps (EC-PNVO)
This flip-open Sabrent enclosure needs no screws or tools, insert the NVMe SSD, lock it in place, and close, reaching up to 10Gbps over USB 3.2 Gen 2 with a thermal pad pressed directly against the SSD for better heat transfer than slide-in enclosure designs.
Best for: buyers prioritizing m.2 nvme enclosure, up to 10gbps
Our take Check price for Sabrent USB-C NVMe Enclosure & Reader, 10Gbps (EC-PNVO) (opens in a new tab)
Best NVMe+SATA Combo
Sabrent Tool-Free NVMe & SATA M.2 SSD Enclosure (EC-SNVE)
Unlike Sabrent's NVMe-only enclosures, this model supports both NVMe and SATA M.2 form factors in 2242/2260/2280 sizes, hitting up to 10Gbps over USB 3.2 Type-C with data copy speeds up to 1,000MB/s, genuinely tool-free for quick SSD swaps.
Best for: buyers prioritizing m.2 nvme + sata enclosure, up to 10gbps
Our take Check price for Sabrent Tool-Free NVMe & SATA M.2 SSD Enclosure (EC-SNVE) (opens in a new tab)
Best 40Gbps NVMe
UGREEN 40Gbps M.2 NVMe Enclosure (SSD Not Included)
Built around the ASM2464PD chip, this enclosure reaches up to 3,600MB/s over Thunderbolt 3/4 (requiring a genuine Thunderbolt 4 cable and device to hit that peak), while remaining backward compatible with USB4/3.2/3.1/3.0/2.0 hosts at correspondingly lower speeds.
Best for: buyers prioritizing m.2 nvme enclosure, up to 3,600mb/s
Our take Check price for UGREEN 40Gbps M.2 NVMe Enclosure (SSD Not Included) (opens in a new tab)
Best USB4 NVMe
Sabrent USB4 NVMe SSD Enclosure, 3,900MB/s (EC-U4TN)
Sabrent's USB4 enclosure hits up to 3,900MB/s over USB4 or 2,700MB/s over Thunderbolt 3/4, backward compatible with 20/10/5Gbps USB-C ports, supporting tool-free PCIe NVMe SSDs in 2230 through 2280 sizes, explicitly not SATA M.2 drives.
Best for: buyers prioritizing usb4 nvme enclosure, up to 3,900mb/s
Our take Check price for Sabrent USB4 NVMe SSD Enclosure, 3,900MB/s (EC-U4TN) (opens in a new tab)
Best 80Gbps NVMe
MOKiN 80Gbps M.2 NVMe Enclosure with LCD Display
MOKiN's enclosure uses an Intel JHL9480+RTL9210B chipset to hit up to 80Gbps over Thunderbolt 5 (included cable), fast enough to transfer 100GB in about 15 seconds, 6-7x faster than a typical 10Gbps SSD reader, supporting PCIe Gen5 SSDs up to 8TB.
Best for: buyers prioritizing m.2 nvme enclosure, up to 80gbps (tb5)
Our take Check price for MOKiN 80Gbps M.2 NVMe Enclosure with LCD Display (opens in a new tab)
Best 2.5in SATA Single-Bay
POSUGEAR 2.5-Inch External Hard Drive Enclosure (USB 3.0)
POSUGEAR's sliding-design enclosure hits 5Gbps with UASP+TRIM dual acceleration, a stated 900% faster than traditional USB 2.0, supporting 2.5-inch 7mm/9.5mm SATA drives and SSDs up to 4TB from major brands including WD, Samsung, and Crucial.
Best for: buyers prioritizing 2.5in single-bay, up to 4tb
Our take Check price for POSUGEAR 2.5-Inch External Hard Drive Enclosure (USB 3.0) (opens in a new tab)
Best 2.5in SATA Enclosure
UGREEN USB-C Hard Drive Enclosure for 2.5-inch SATA SSD/HDD
This UGREEN enclosure targets 2.5-inch SATA drives specifically, hitting up to 6Gbps with UASP acceleration (70% faster than plain USB 3.0) over a USB-C port that itself supports 10Gbps USB 3.1 Gen 2, with the ASM235CM chipset handling the SATA-to-USB bridging.
Best for: buyers prioritizing 2.5in sata enclosure, up to 6gbps
Our take Check price for UGREEN USB-C Hard Drive Enclosure for 2.5-inch SATA SSD/HDD (opens in a new tab)
| Pick | Why it’s here | Best for | Price |
|---|---|---|---|
| UGREEN's NVMe enclosure hits a genuine 10Gbps over USB 3.2 Gen 2 (with a matching USB-C 3.2 Gen2 cable), supporting M/B&M-key NVMe SSDs in 2230/2242/2260/2280 sizes up to 8TB, explicitly not SATA NGFF or mSATA SSDs. | buyers prioritizing m.2 nvme enclosure, up to 8tb, 10gbps | Check price for UGREEN Tool-Free M.2 NVMe SSD Enclosure (10Gbps) (opens in a new tab) |
| This flip-open Sabrent enclosure needs no screws or tools, insert the NVMe SSD, lock it in place, and close, reaching up to 10Gbps over USB 3.2 Gen 2 with a thermal pad pressed directly against the SSD for better heat transfer than slide-in enclosure designs. | buyers prioritizing m.2 nvme enclosure, up to 10gbps | Check price for Sabrent USB-C NVMe Enclosure & Reader, 10Gbps (EC-PNVO) (opens in a new tab) |
| Unlike Sabrent's NVMe-only enclosures, this model supports both NVMe and SATA M.2 form factors in 2242/2260/2280 sizes, hitting up to 10Gbps over USB 3.2 Type-C with data copy speeds up to 1,000MB/s, genuinely tool-free for quick SSD swaps. | buyers prioritizing m.2 nvme + sata enclosure, up to 10gbps | Check price for Sabrent Tool-Free NVMe & SATA M.2 SSD Enclosure (EC-SNVE) (opens in a new tab) |
| Built around the ASM2464PD chip, this enclosure reaches up to 3,600MB/s over Thunderbolt 3/4 (requiring a genuine Thunderbolt 4 cable and device to hit that peak), while remaining backward compatible with USB4/3.2/3.1/3.0/2.0 hosts at correspondingly lower speeds. | buyers prioritizing m.2 nvme enclosure, up to 3,600mb/s | Check price for UGREEN 40Gbps M.2 NVMe Enclosure (SSD Not Included) (opens in a new tab) |
| Sabrent's USB4 enclosure hits up to 3,900MB/s over USB4 or 2,700MB/s over Thunderbolt 3/4, backward compatible with 20/10/5Gbps USB-C ports, supporting tool-free PCIe NVMe SSDs in 2230 through 2280 sizes, explicitly not SATA M.2 drives. | buyers prioritizing usb4 nvme enclosure, up to 3,900mb/s | Check price for Sabrent USB4 NVMe SSD Enclosure, 3,900MB/s (EC-U4TN) (opens in a new tab) |
| MOKiN's enclosure uses an Intel JHL9480+RTL9210B chipset to hit up to 80Gbps over Thunderbolt 5 (included cable), fast enough to transfer 100GB in about 15 seconds, 6-7x faster than a typical 10Gbps SSD reader, supporting PCIe Gen5 SSDs up to 8TB. | buyers prioritizing m.2 nvme enclosure, up to 80gbps (tb5) | Check price for MOKiN 80Gbps M.2 NVMe Enclosure with LCD Display (opens in a new tab) |
| POSUGEAR's sliding-design enclosure hits 5Gbps with UASP+TRIM dual acceleration, a stated 900% faster than traditional USB 2.0, supporting 2.5-inch 7mm/9.5mm SATA drives and SSDs up to 4TB from major brands including WD, Samsung, and Crucial. | buyers prioritizing 2.5in single-bay, up to 4tb | Check price for POSUGEAR 2.5-Inch External Hard Drive Enclosure (USB 3.0) (opens in a new tab) |
| This UGREEN enclosure targets 2.5-inch SATA drives specifically, hitting up to 6Gbps with UASP acceleration (70% faster than plain USB 3.0) over a USB-C port that itself supports 10Gbps USB 3.1 Gen 2, with the ASM235CM chipset handling the SATA-to-USB bridging. | buyers prioritizing 2.5in sata enclosure, up to 6gbps | Check price for UGREEN USB-C Hard Drive Enclosure for 2.5-inch SATA SSD/HDD (opens in a new tab) |
Our Picks
Best NVMe 10Gbps1 of 8
UGREEN Tool-Free M.2 NVMe SSD Enclosure (10Gbps) on Amazon (opens in a new tab)
UGREEN's NVMe enclosure hits a genuine 10Gbps over USB 3.2 Gen 2 (with a matching USB-C 3.2 Gen2 cable), supporting M/B&M-key NVMe SSDs in 2230/2242/2260/2280 sizes up to 8TB, explicitly not SATA NGFF or mSATA SSDs.
Best for
- buyers prioritizing m.2 nvme enclosure, up to 8tb, 10gbps
Skip if
- Skip it if nVMe only, does not support SATA M.2 (NGFF) drives.
Why we like it
A buckle-based tool-free design and RTL9210 controller chip add short-circuit and over-current protection plus UASP/TRIM support for sustained SSD performance and longevity. The ultra-slim aluminum body ships with a silicone case for travel durability.
Key dimensions & specs
- M.2 NVMe enclosure, up to 8TB, 10Gbps
- RTL9210 chip, UASP/TRIM support
- Tool-free, silicone travel case included
Pros
- Genuine 10Gbps with the right cable, not just link-rate marketing
- RTL9210 chip adds real UASP/TRIM support for SSD longevity
- Silicone case adds travel durability
Cons
- NVMe only, does not support SATA M.2 (NGFF) drives
- Requires a USB-C 3.2 Gen2-rated cable for full 10Gbps
Best Single-Slot NVMe2 of 8
Sabrent USB-C NVMe Enclosure & Reader, 10Gbps (EC-PNVO) on Amazon (opens in a new tab)
This flip-open Sabrent enclosure needs no screws or tools, insert the NVMe SSD, lock it in place, and close, reaching up to 10Gbps over USB 3.2 Gen 2 with a thermal pad pressed directly against the SSD for better heat transfer than slide-in enclosure designs.
Best for
- buyers prioritizing m.2 nvme enclosure, up to 10gbps
Skip if
- Skip it if nVMe only, no SATA M.2 (2242/2260/2280 sizes) support.
Why we like it
It's NVMe-only, explicitly not compatible with M.2 SATA SSDs, supporting 2230 through 2280 sizes up to at least 8TB, bus-powered with no external adapter or drivers needed, aimed at creators, gamers, and portable tech work like cloning or troubleshooting.
Key dimensions & specs
- M.2 NVMe enclosure, up to 10Gbps
- Flip-open tool-free design
- Direct thermal pad contact for cooling
Pros
- Flip-open design is faster to use than screw-based enclosures
- Direct thermal pad contact improves sustained heat transfer over slide-in designs
- Bus-powered, no drivers or external power needed
Cons
- NVMe only, no SATA M.2 (2242/2260/2280 sizes) support
- 10Gbps ceiling below newer 20Gbps/40Gbps NVMe enclosures
Best NVMe+SATA Combo3 of 8
Sabrent Tool-Free NVMe & SATA M.2 SSD Enclosure (EC-SNVE) on Amazon (opens in a new tab)
Unlike Sabrent's NVMe-only enclosures, this model supports both NVMe and SATA M.2 form factors in 2242/2260/2280 sizes, hitting up to 10Gbps over USB 3.2 Type-C with data copy speeds up to 1,000MB/s, genuinely tool-free for quick SSD swaps.
Best for
- buyers prioritizing m.2 nvme + sata enclosure, up to 10gbps
Skip if
- Skip it if 10Gbps ceiling is the entry tier versus 20Gbps/40Gbps/80Gbps rivals.
Why we like it
The ultra-slim aluminum-and-ABS case is bus-powered with no external adapter, positioned for tech enthusiasts, 4K content creators, and engineers who need one enclosure that works with either M.2 drive type rather than buying separate NVMe-only and SATA-only cases.
Key dimensions & specs
- M.2 NVMe + SATA enclosure, up to 10Gbps
- 2242/2260/2280 sizes
- Up to 1,000MB/s documented
Pros
- Supports both NVMe and SATA M.2 drives in one enclosure, unlike NVMe-only rivals
- Bus-powered, no external adapter needed
- Documented up to 1,000MB/s real-world speed
Cons
- 10Gbps ceiling is the entry tier versus 20Gbps/40Gbps/80Gbps rivals
- 2230-size SSDs not supported, only 2242/2260/2280
Best 40Gbps NVMe4 of 8
UGREEN 40Gbps M.2 NVMe Enclosure (SSD Not Included) on Amazon (opens in a new tab)
Built around the ASM2464PD chip, this enclosure reaches up to 3,600MB/s over Thunderbolt 3/4 (requiring a genuine Thunderbolt 4 cable and device to hit that peak), while remaining backward compatible with USB4/3.2/3.1/3.0/2.0 hosts at correspondingly lower speeds.
Best for
- buyers prioritizing m.2 nvme enclosure, up to 3,600mb/s
Skip if
- Skip it if full 3,600MB/s requires a genuine Thunderbolt 4 cable and host.
Why we like it
A double-sided fin design plus a three-dimensional cooling system delivers several times the heat dissipation of a standard enclosure without needing a fan, keeping operation silent. It supports 2230/2242/2260/2280 NVMe SSDs up to 8TB, explicitly excluding SATA NGFF or mSATA drives.
Key dimensions & specs
- M.2 NVMe enclosure, up to 3,600MB/s
- ASM2464PD chip, Thunderbolt 3/4 + USB4
- Fanless double-sided fin cooling
Pros
- 3,600MB/s peak speed without a cooling fan
- Broad backward compatibility down to USB 2.0
- Compact and travel-friendly aluminum build
Cons
- Full 3,600MB/s requires a genuine Thunderbolt 4 cable and host
- NVMe only, thick SSDs with pre-installed heatsinks may not fit
Best USB4 NVMe5 of 8
Sabrent USB4 NVMe SSD Enclosure, 3,900MB/s (EC-U4TN) on Amazon (opens in a new tab)
Sabrent's USB4 enclosure hits up to 3,900MB/s over USB4 or 2,700MB/s over Thunderbolt 3/4, backward compatible with 20/10/5Gbps USB-C ports, supporting tool-free PCIe NVMe SSDs in 2230 through 2280 sizes, explicitly not SATA M.2 drives.
Best for
- buyers prioritizing usb4 nvme enclosure, up to 3,900mb/s
Skip if
- Skip it if pCIe NVMe only, no SATA M.2 support.
Why we like it
It's optimized for PCIe Gen4 x4 SSDs like Sabrent's own Rocket 4 Plus, with an integrated active cooling fan built into the aluminum-and-ABS body to sustain speed during large file transfers, plug-and-play on both Windows and macOS with no drivers needed.
Key dimensions & specs
- USB4 NVMe enclosure, up to 3,900MB/s
- 2,700MB/s over Thunderbolt 3/4
- Integrated active cooling fan
Pros
- 3,900MB/s over USB4 is near the top of this speed tier
- Broad backward compatibility down to 5Gbps USB-C ports
- Optimized specifically for PCIe Gen4 x4 SSDs
Cons
- PCIe NVMe only, no SATA M.2 support
- Full 3,900MB/s requires a genuine USB4 host port
Best 80Gbps NVMe6 of 8
MOKiN 80Gbps M.2 NVMe Enclosure with LCD Display on Amazon (opens in a new tab)
MOKiN's enclosure uses an Intel JHL9480+RTL9210B chipset to hit up to 80Gbps over Thunderbolt 5 (included cable), fast enough to transfer 100GB in about 15 seconds, 6-7x faster than a typical 10Gbps SSD reader, supporting PCIe Gen5 SSDs up to 8TB.
Best for
- buyers prioritizing m.2 nvme enclosure, up to 80gbps (tb5)
Skip if
- Skip it if full 80Gbps requires a genuine Thunderbolt 5 port and cable.
Why we like it
A built-in LCD screen shows real-time temperature status (Normal/Medium/High) and fan speed with clear overheating alerts, backed by an active 3-speed fan that starts at 40°C to prevent thermal throttling during intensive transfers.
Key dimensions & specs
- M.2 NVMe enclosure, up to 80Gbps (TB5)
- LCD real-time temp/fan display
- PCIe Gen5 SSD support, up to 8TB
Pros
- Real-time LCD temperature and fan-speed display is a genuine diagnostic feature
- 80Gbps Thunderbolt 5 is at the current performance ceiling for DAS
- 3-speed active fan actively prevents thermal throttling
Cons
- Full 80Gbps requires a genuine Thunderbolt 5 port and cable
- Actual speed varies significantly by connected SSD and host generation
Best 2.5in SATA Single-Bay7 of 8
POSUGEAR 2.5-Inch External Hard Drive Enclosure (USB 3.0) on Amazon (opens in a new tab)
POSUGEAR's sliding-design enclosure hits 5Gbps with UASP+TRIM dual acceleration, a stated 900% faster than traditional USB 2.0, supporting 2.5-inch 7mm/9.5mm SATA drives and SSDs up to 4TB from major brands including WD, Samsung, and Crucial.
Best for
- buyers prioritizing 2.5in single-bay, up to 4tb
Skip if
- Skip it if 4TB capacity ceiling is the lowest in this comparison set.
Why we like it
A PC+ABS shell with EVA sponge padding protects against drops and shocks while keeping a stable SATA connection, and an automatic hibernation function plus over-current/over-voltage/overheat protection round out a budget-tier but genuinely protective single-bay design.
Key dimensions & specs
- 2.5in single-bay, up to 4TB
- USB 3.0, 5Gbps with UASP+TRIM
- PC+ABS shell with shock protection
Pros
- EVA sponge padding adds genuine drop/shock protection
- UASP+TRIM dual acceleration for SSD longevity and speed
- Automatic hibernation and multi-layer electrical protection
Cons
- 4TB capacity ceiling is the lowest in this comparison set
- Single-bay only, no multi-drive expansion
Best 2.5in SATA Enclosure8 of 8
UGREEN USB-C Hard Drive Enclosure for 2.5-inch SATA SSD/HDD on Amazon (opens in a new tab)
This UGREEN enclosure targets 2.5-inch SATA drives specifically, hitting up to 6Gbps with UASP acceleration (70% faster than plain USB 3.0) over a USB-C port that itself supports 10Gbps USB 3.1 Gen 2, with the ASM235CM chipset handling the SATA-to-USB bridging.
Best for
- buyers prioritizing 2.5in sata enclosure, up to 6gbps
Skip if
- Skip it if 2.5in SATA only, no 3.5in support.
Why we like it
No cooling fan is needed since the aluminum alloy housing handles heat dissipation passively, and it's compatible with drives up to 6TB including major brands like WD, Seagate, Samsung, and Crucial. A USB-C to USB-C cable is included.
Key dimensions & specs
- 2.5in SATA enclosure, up to 6Gbps
- ASM235CM chipset, fanless aluminum
- Up to 6TB drive support
Pros
- Fanless aluminum housing for silent passive cooling
- UASP acceleration genuinely faster than plain USB 3.0
- USB-C to USB-C cable included in the box
Cons
- 2.5in SATA only, no 3.5in support
- 6TB capacity ceiling limits large-drive upgrades
How We Chose
Each pick was assessed across 5 criteria weighted for real-world use.
- Connection & Drive Architecture
- Verified whether each product is genuinely direct-attached storage (USB, Thunderbolt, or SAS to one host) and whether drives mount individually, in JBOD, or under real hardware RAID, rather than assuming any multi-bay box works the same way.
- Real Interface Speed
- Checked the documented USB generation, Thunderbolt generation, or SAS link speed against real sustained throughput figures where manufacturers publish them, rather than repeating theoretical link-rate marketing numbers.
- RAID/JBOD Implementation
- Distinguished hardware-controller RAID from host-software RAID from plain JBOD/individual-disk presentation, since these have very different failure, portability, and rebuild behavior.
- Build, Cooling & Serviceability
- Weighed tool-free tray design, hot-swap support, fan noise where documented, and daisy-chain or expansion options against the product's likely desk, closet, or rack environment.
- Total Ownership Cost
- Considered that most DAS enclosures ship diskless, factoring in drive cost, cables, and RAID software where relevant rather than judging price on the empty enclosure alone.
What to Look for in an SSD DAS Storage in
Key buying criteria so you get the right fit the first time.
DAS means direct host attachment, not RAID
USB, Thunderbolt, and enterprise SAS storage can all be DAS. The term describes how the storage connects to a host, not whether it has RAID, what drive type it uses, or how many bays it has. Check those separately.
Bay count is not usable capacity
An 8-bay enclosure with 8x20TB drives does not give you 160TB of usable space in RAID 5 or RAID 6, parity drives eat real capacity. Calculate usable capacity under your intended RAID mode, not raw bay count times drive size.
Hardware RAID and host software RAID are not interchangeable
Hardware/enclosure RAID keeps the array portable across hosts and survives an OS reinstall; host software RAID (or SoftRAID on Mac) ties the array to specific software but is often more flexible and doesn't depend on one controller chip surviving.
The interface link rate is not your real transfer speed
A 10Gbps USB-C enclosure with 5 mechanical HDDs running simultaneously will bottleneck well below 10Gbps once you account for real sustained HDD throughput, typically 150-250MB/s per drive. Multi-drive aggregate speed matters more than the port's rated maximum.
RAID is not backup
RAID 1 or RAID 5 protects against a single drive failure, not against accidental deletion, ransomware, fire, or theft. Keep a genuine separate backup copy of anything irreplaceable, regardless of how much RAID redundancy your DAS provides.
Diskless enclosures need drives budgeted separately
Most multi-bay DAS enclosures ship completely empty. Factor in 2-8 hard drives or SSDs at your target capacity before comparing the enclosure's sticker price against a similarly-priced preconfigured external drive.
How to Choose an SSD DAS Storage in
2.5in SATA SSD vs M.2 NVMe
| Architecture | Realistic speed ceiling |
|---|---|
| 2.5in SATA SSD enclosure | ~500-600MB/s (SATA III limit) |
| M.2 NVMe enclosure, 10Gbps | ~1,000MB/s |
| M.2 NVMe enclosure, 40-80Gbps | Up to 7,000MB/s |
Frequently Asked Questions
Is NVMe always better than SATA SSD for DAS?
For raw speed, yes. But 2.5in SATA SSD enclosures are typically cheaper and support a wider range of existing drives you may already own, while NVMe enclosures require newer M.2 drives and a fast enough host port to see the speed benefit.
Does RAID replace the need for a separate backup?
No. RAID protects against a single drive's hardware failure, but it does not protect against accidental deletion, ransomware, fire, theft, or a controller failure that affects the whole array at once. Keep a genuine separate backup copy of anything you can't afford to lose.
Do DAS enclosures come with drives included?
Most multi-bay DAS enclosures in this category ship completely diskless, you supply your own 2.5in or 3.5in SATA HDDs/SSDs or M.2 NVMe SSDs depending on the model. Budget for drive cost separately when comparing total price against a preconfigured external drive.
Will any USB-C or Thunderbolt cable give me full DAS speed?
No. Cable quality and rated bandwidth matter as much as the port. A basic charging-only USB-C cable can bottleneck a 10Gbps or faster enclosure well below its rated speed. Use the cable included with the enclosure, or one explicitly rated for the matching USB or Thunderbolt generation.
Can I add or remove drives from a DAS enclosure without powering it down?
Only if the specific enclosure documents hot-swap support, which most tool-free tray designs in this category do. Always check your specific product's hot-swap capability before removing a drive live, since not every budget enclosure supports it, especially some fixed-RAID-mode units.
Bottom Line
Start with the UGREEN Tool-Free M.2 NVMe SSD Enclosure (10Gbps), our Best NVMe 10Gbps, then compare it with the other picks on the spec that matters most to you.